JLG 544D10-55 Telescopic Forklift

Performance

Rated Capacity

• At 24 in. (610 mm) load center,
  10,000 lb (4,536 kg)

Maximum Lift Height

• 55 ft (16.8 m)

Frame Leveling

• 8 degrees

Lift Speed (boom retracted)

• Up: 11.9 sec
  Down: 9.3 sec

Boom Speed

• Extend: 18.3 sec
  Retract: 17.6 sec

Travel Speed Forward

• 2WD 0-19 mph (30.6 kmph)
  4WD 0-6.5 mph (10.5 kmph)

Drawbar Pull (Loaded)

• 18,400 lb (8,346 kg)

Operating Weight

• With 48 in. (1.2 m) carriage and forks,
  33,570 lb (15,227 kg)

Standard Specifications

Engine

• Make and Model:-
  John Deere 4045HF275
  Turbocharged and Aftercooled
• Fuel No.:-  2 Diesel
• Cycles:-  4
• No. of Cylinders:- 4
• Displacement:- 276 cu in (4.5 L)
• Rated Speed:- 2,500 rpm
• Max. Gross BHP:- 125 hp (93 kW)
• Fuel Tank:- 38 gal (144 L)

Engine Filters

• Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector plus replaceable dry filter element.
• Visual service indicator.
• Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.

Electrical System

• Voltage: 12V
• Alternator: 65 amp
• Battery: 1050 cold cranking amps at 0°F

Hydrostatic Drive

• 6,300 PSI (43,437 kPa) closed loop with piston pump and motors.
• All hydraulic connections ORS and Code 62 O-ring flanges.
• Integral reservoir with implement hydraulics.
• 8 micron suction filter for charge pump.
• Self-contained, swashplate design, variable displacement, over center, piston pump.
• Neutral start switch. (Park brake must also be engaged to start.)
• 2WD — 4WD inching.
• Audible back-up travel alarm mounted in counterweight area signals reverse movement.

Axles

• Planetary hubs with piston motors on rear axle.
• Piston motor-driven planetary front axle with high-bias differential.

Service Brakes

• Hydraulic wet disc brake on each front wheel.
• Hydraulic dynamic braking on front axle and both rear wheels.

Parking Brakes

• Wet disc spring-applied electro/hydraulic release, fail-safe on both front wheels.
• Light on dash indicates when brakes are on.

Tires

• Standard: 14:00 x 24 — 12PR, G2 type.
• Optional: Radial 14:00 x 24 — 12PR.

Cab

• Certified ROPS/FOPS structure with horn, back-up alarm and standard right side rear view mirror.
• Forward, neutral, reverse lever on left of steering column.
• Single foot pedal control provides both braking and inching for lifting while maneuvering vehicle.
• Electro/hydraulic traction lock valve for superior tractive effort.

Steering

• Hydraulic power steering with manual backup.
• Rear wheel steering, 90° pivot around either front tire.
• Outside turning radius is less than chassis length.

Instruments

• Volt meter, hourmeter, engine oil pressure, temperature, fuel gauge.
• All gauges protected by clear acrylic cover.

Controls

• Grouped for operator comfort and convenience.
• 2WD and 4WD switch on dash.
• Boom lift and crowd on single joystick.
• Right-hand tilt and sway lever.
• Foot throttle.
• Floor mounted traction lock switch.

Hydraulic System-Implement

• Single-section gear pump.
• 40 gal (151.4 L) system capacity.
• 8 micron filter with visual service indicator and suction strainer.
• Lift, crowd, tilt and sway cylinders have safety checks to prevent dropping of load in the event of hose or other hydraulic failure.

Auxiliary Hydraulics

• Used for all attachments equipped with cylinders or other hydraulic components.
• Consists of valves, controls and hydraulic lines

Accessories & Options

Cab Enclosure

• Lockable, split door.
• Windshield wiper.
• Heater & defroster fan.

Light Group

• Consists of 2 cab-mounted headlights,
• 1 backup/tail/stoplight and rotating beacon.

Radial Tires
Winch
Left Hand Tilt/Sway Control
Tilt on Joystick

Attachments

Standard Carriage

• 48 in. (1.2 m), 66 in. (1.7 m) or 72 in. (1.8 m)

Side Tilt Carriage

• 48 in. (1.2 m) or 66 in. (1.7 m)

100° Swing Carriage

• 72 in. (1.8 m) Carriage

180° Swing Carriage

• 72 in. (1.8 m)

100° Drywall Swing Carriage

• 72 in. (1.8 m)

Pallet Forks

• 2 x 6 x 48 in.
  (51 mm x 152 mm x 1.2 m)

Cubing Forks

• 2 x 2 x 48 in.
  (51 mm x 51 mm x 1.2 m)

Vertical Mast

• 6 ft (1.8 m)

100° Swing Mast

• 6 ft (1.8 m)

Truss Boom With or Without Winch

• 10 ft (3.0 m)

Bucket

• 0.75 cu yd (0.57 m3)
  or
  1.25 cu yd (0.95 m3)

Work Platform
Slip On Crane Hook
Instant Hook