Description
Performance
- Rated Capacity
At 24 in. (610 mm) load center,
10,000 lb (4,536 kg) - Maximum Lift Height
45 ft (13.7 m) - Frame Leveling
8 degrees - Lift Speed (boom retracted)
Up: 10.8 sec
Down: 8.1 sec - Boom Speed
Extend: 14.5 sec
Retract: 13.4 sec - Travel Speeds Forward
2WD 0-19 mph (30.6 kmph)
4WD 0-6.5 mph (10.5 kmph) - Drawbar Pull (Loaded)
21,000 lb (9,526 kg) - Operating Weight
With 48 in. (1.2 m) carriage and forks,
25,300 lb (11,476 kg)
Standard Specifications
Engine
- Make and Model:– John Deere 4045TF275 Turbocharged
- Fuel No. 2: – Diesel
- Cycles:- 4
- No. of Cylinders:- 4
- Displacement:- 276 cu in (4.5 L)
- Rated Speed:- 2,500 rpm
- Max. Gross:- BHP 115 hp (85 kW)
- Fuel Tank:- 38 gal (144 L)
Engine Filters
- Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector plus replaceable dry filter element.
- Visual service indicator.
- Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
Electrical System
- Voltage: 12V
- Alternator: 65 amp
- Battery: 1050 cold cranking amps at 0°F
Hydrostatic Drive
- 6,300 PSI (43,437 kPa) closed loop with piston pump and motors.
- All hydraulic connections ORS and Code 62 O-ring flanges.
- Integral reservoir with implement hydraulics.
- 8 micron suction filter for charge pump.
- Self-contained, swashplate design, variable displacement, over center, piston pump.
- Neutral start switch. (Park brake must also be engaged to start.)
- 2WD — 4WD inching.
- Audible back-up travel alarm mounted in counterweight area signals reverse movement.
Axles
- Planetary hubs with piston motors on rear axle.
- Piston motor-driven planetary front axle with high-bias differential.
Service Brakes
- Hydraulic wet disc brake on each front wheel.
- Hydraulic dynamic braking on front axle and both rear wheels.
Parking Brakes
- Wet disc spring-applied electro/hydraulic release, fail-safe on both front wheels.
- Light on dash indicates when brakes are on.
- Frame mounted right side rear view mirror.
Tires
- Standard: 14:00 x 24 — 12PR, G2 type.
- Optional: Radial 14:00 x 24 — 12PR L2 rock tires.
Cab
- Certified ROPS/FOPS structure with horn, back-up alarm and standard right side rear view mirror.
- Forward, neutral, reverse lever on left of steering column.
- Single foot pedal control provides both braking and inching for lifting while maneuvering vehicle.
- Electro/hydraulic traction lock valve for superior tractive effort.
Steering
- Hydraulic power steering with manual backup.
- Rear wheel steering, 90° pivot around either front tire.
- Outside turning radius is less than chassis length.
Instruments
- Volt meter, hourmeter, engine oil pressure, temperature, fuel gauge.
- All gauges protected by clear acrylic cover.
Controls
- Grouped for operator comfort and convenience.
- 2WD and 4WD switch on dash.
- Boom lift and crowd on single joystick.
- Right-hand tilt and sway lever.
- Foot throttle.
- Floor mounted traction lock switch.
Hydraulic System-Implement
- Single-section gear pump.
- 40 gal (151.6 L) system capacity
- 8 micron filter with visual service indicator and suction strainer.
- Lift, crowd, tilt and sway cylinders have safety checks to prevent dropping of load in the event of hose or other hydraulic failure.
Auxiliary Hydraulics
- Used for all attachments equipped with cylinders or other hydraulic components.
- Consists of valves, controls and hydraulic lines
Accessories & Options
Cab Enclosure
- Lockable, split door. Windshield wiper.
- Heater & defroster fan.
Light Group
- Consists of 2 cab-mounted headlights, 1 backup/tail/stoplight and rotating beacon.
Radial and Rock Tires
Winch
Left Hand Tilt/Sway Control
Tilt on Joystick
Attachments
Standard Carriage
- 48 in. (1.2 m), 66 in. (1.7 m) or 72 in. (1.8 m)
Side Tilt Carriage
- 48 in. (1.2 m) or 66 in. (1.7 m)
100° Swing Carriage
- 72 in. (1.8 m) Carriage
180° Swing Carriage
- 72 in. (1.8 m)
100° Drywall Swing Carriage
- 72 in. (1.8 m)
Pallet Forks
- 2 x 6 x 48 in.
(51 mm x 152 mm x 1.2 m)
Cubing Forks
- 2 x 2 x 48 in.
(51 mm x 51 mm x 1.2 m)
Vertical Mast
- 6 ft (1.8 m)
100° Swing Mast
- 6 ft (1.8 m)
Truss Boom With or Without Winch
- 10 ft (3.0 m)
Bucket
- 0.75 cu yd (0.57 m3)
or
1.25 cu yd (0.95 m3)
Work Platform
Slip On Crane Hook
Instant Hook
DIMENSIONS
Length (less forks) . . . . . 237 in. (6.01 m)
Width . . . . . . . . . . . . . 98.8 in. (2.50 m)
Height . . . . . . . . . . . . . . 98 in. (2.48 m)
Wheelbase . . . . . . . . . . 135 in. (3.42 m)
Ground Clearance. . . . 20.8 in. (528 mm)
Outside Turning Radius. . 175 in. (4.44 m)
Max. Reach from Front Tires to
24 in. (610 mm) Load Center . . . . . 42 ft(12.8 m)
Reviews
There are no reviews yet.